Product Description
The largest of the Super Duty Metal Cutting Series, the 22 in Series is still part of the ultimate workhorse of the industry and are also capable of operating 2 to 3 shifts per day, and able to do a wide variety of cutoff work including miters, bevels and compound miter work. What sets these machines apart form the 16 in/20 in Series are the 22 in blade capacity and the addition of the Variable Frequency Drive System for the arbor motor. The VFD allows the machine to better handle the large OD blade and has a very smooth startup. Once the åÎÌøON in button is pressed the machine ramps up RPM with 80% less amp draw thn previous models. The cast iron and ductile iron construction stays the same . The machines are capable of cutting off 8 in deep in a single pass and 4 in deep on a 45 degree bevel.
Standard Features
- Totally enclosed fan cooled 7.5 hp motors
- All 3-phase units are available in 208/230/380/400/460/575 voltages
- Motors manufactured by Original Saw Company
- Automatic Brake System
- Manual chain crank cross feed
- Powder Coated Heavy Gage frame and legs
- Powder Coated castings
- Large oversized aluminum t-slot table
- Full IEC magnetic starter with low voltage and overload protection
- Low voltage controls ( 24 volts at start/stop station)
- Precision ground 6 in diameter blade collars
- Complete upper and lower blade guards
- Wrench pack
Motors- All Super Duty, Heavy Duty, and Contractor Duty Series motors are manufactured in our Northern Iowa facility. Producing our own motors allows us to uphold a very high level of quality in our machines. These totally enclosed fan cooled (TEFC) motors are manufactured with cooling ducts that move air through the motor laminations to keep them cool while keeping the internal portion of the motor sealed from dust and contamination. These motors also offer the added benefit of an integrated electro-mechanical brake system, these brake systems continue to operate even when the power drops out. Electronic brake systems, cannot compete with the durability or reliability of our electromechanical brake systems.
Cast Construction - Original Saw Company ins Radial Arm Saws are manufactured utilizing high quality heavy cast iron and cast aluminum construction. These high quality American castings provide a very rigid, vibration free cutting platform to perform many different sawing and dado operations. It is because of this construction, we can proudly say our machines are the best in the industry. Many of the machines we produce today will be around for generations.
Carriage Control - The metal cutting series comes standard with a manual chain feed assembly. This feature gives the operator better control of the carriage versus pulling the carriage by hand.
Guarding - Shown left is the Metal Cutter ins exclusive åÎ̱door style in guard that allows easier and quicker blade changes, the guard needs only to be opened not taken off to change the blade out. This is a very important feature for the ferrous cutting application where frequent blade changes are necessary for optimum cutting performance and safety.
Table - The Metal Cutting Series comes with the standard t-slot aluminum extruded top. This top allows for easy attaching of our aluminum fence (shown), clamping systems, or table surface options, as well as your own clamping jigs or cutting fixtures. These all come mounted to a extruded leveling frame for easy leveling of the entire table assembly through out the life of the machine.
Shipping Infomation
Price listed for shipping is standard shipping. Price does not included tailgate service or expedited shipping. If you need special shipping arrangments please call 1800-428-9898 for a quote.
