Product Description
Plane your material efficiently in a single pass.
The Cantek GT635ARD 25″ double surface planer has a robust cast-iron body for industrial planing day in and day out. The spiral insert knife cutterheads produce a smooth planed finish with maximum stock removal. The material is passed over the bottom head with a spring-loaded pin feed system allowing it to act like a jointer to flatten the board prior to being planed to an accurate thickness with the top head.
Why Cantek GT635ARD 25″ Double Surface Planer?
- Spring loaded conveyor pin system ensures material is passed over the bottom cutterhead to resulting in a flat and uniform board prior to planing to thickness on the top head
- Spiral insert knife cutterheads with two-sided solid carbide knives produce a smooth finish with increased stock removal capacity and extremely quiet operation
- Heavy-duty cast-iron machine body and table for vibration free cutting
- Digital electronic thickness adjustment in INCH and MM (Inch = 0.001” / mm = 0.01mm resolution) for precise thickness control
- 25″ x 8″ capacity as standard with optional 16″, 20″, 24″ thickness capacity
- Cutterheads are spiral insert type with six (6) rows of carbide inserts
- (2) driven and (1) idle bed roll for superior feeding of even difficult material
- Swiveling control panel for more ergonomic access to machine controls
- Inverter variable speed control with feed speeds from 26 to 80 FPM
- Easy to access external handwheel adjustment of infeed bed
- Hard chromed worktable for high wear resistance
- Auto lubrication to conveyor chain, central lubrication for dovetail elevation guideways
- Section chipbreaker and sectional feed roller before top cutterhead
- Rubber outfeed top roller to prevent chip marking
- Over thickness safety shut-off bar across infeed.
- Ammeter for each motor on control panel to monitor motor load
Maximum working width | 25″ |
Maximum working thickness | 8″ (16″, 20″, 24″ optional, please inquire) |
Minimum working thickness | 0.315″ |
Minimum workpiece length | 12.2″ |
Bottom head motor | 20 HP |
Top planing head motor | 25 HP |
Feed motor | 5 HP |
Table elevation motor | 1/2 HP |
Cutterhead diameter | 4″ |
Knife dimensions | 30mm x 12mm x 1.5mm w/ bevels (96 pcs per head) |
Cutterhead speed | 5400 RPM |
Feed speed (variable) | 26-80 FPM |
Dust ports | 2 @ 6” |
Table dimensions | 27″ x 103″ (32″ from the floor) |
Machine voltage | 460/3/60 = 69.7 amps575/3/60 = 56 amps |
Machine dimensions (LxWxH) | 105″ x 45.1″ x 67.7″ |
Net weight | 6600 lbs |
Packaging dimensions | 109″ x 49″ x 74″ |
Gross weight | 7700 lbs |
