Product Description
JET 15" Variable Speed Drill Press
These JET Drill Presses use a variable-speed motor with the stepped-pulley system, and come equipped with a continuously variable transmission. This enables use at a wide range of speeds, as well as the ability to change speed during operation. A scale-marked hand wheel that matches the desired machine speed is mounted to a reduction gearing system for precise operator control. This adjusts the gearing ratio between the motor's fixed pulley and the output shaft's variable pulley, changing the speed of the chuck. A tensioner pulley is implemented in the belt transmission to take up or release the slack in the belt as the speed changes.
Features:
- Full bearing support on quill for maximum spindle stiffness
- Handwheel speed adjustment of 400 to 5,000 RPM
- Large 2-1/4" quill for greater accuracy
- 3" column diameter for maximum head support
- 6" stroke for deep hole application
- Accurate depth stop for precise hole depths
Specifications:
| Model Number | J-A5816 |
| Drilling Capacity Cast Iron | 5/8 in. |
| Drilling Capacity Mild Steel | 1/2 in. |
| Column Diameter | 3 in. |
| Distance Column to Spindle | 15 in. |
| Rangel of Spindle Speeds | 400-5000 RPM |
| Spindle Travel | 6 in. |
| Spindle Distance to Base | 44-1/2 in. |
| Max Distance Spindle to Table | 25-3/4 in. |
| Table Size | 15x18 in. |
| Table Travel | 16-3/4 in. |
| T-Slots Number and Size | 2 & 1/2 in. |
| T-Slot Centers | 5-5/16 in. |
| Work Table Weight Capacity | 90 lbs. |
| Spindle Taper | MT-2 |
| Base Dimensions (LxWxH/in.) | 20-7/8x14-3/16x3-1/8 |
| Base Work Table | 12-1/8x11-13/16 |
| Base Slots Number & Size | 2 & 1/2 in. |
| Motor | 1HP, 115/230V, 1 Ph, Prewired 115V |
| Overall Dimensions (in./LxWxH) | 30x20x71 |
| Net Weight | 426 lbs. |
Price listed for shipping is standard shipping. Price does not included tailgate service or expedited shipping. If you need special shipping arrangements, please call 1800-428-9898 for a quote.
